| 外形尺寸 | 200CM*170CM*150CM |
|---|---|
| 种类 | 折弯机 |
| 重量 | 350KG |
| 品牌 | 德力焊接设备有限公司 |
| 型号 | ST-EFM |
| 加工定制 | 是 |
ST-EFM Series Spinning Type Automatic Pipe End FlaringMachine
ST-EFM系列旋压式全自动管端喇叭口成型机
主要功能及应用
喇叭口常用于冷凝器、蒸发器的管道连接以及焊接。
喇叭口制作应大小适宜，过大会开裂，过小接触面不够，要求喇叭口均匀、光滑、无划痕、无毛刺。
管端喇叭口成型机主要利用旋压的方式，将铜管或者铝管的管端加工成喇叭口形状，高速旋压扩口，与机械式锻打扩口相比，开口处光滑，平整，无破裂。
MainCharacteristics and Applications
Trumpet Tube End is often used in the pipeconnecting and welding of the condenser and evaporator.
As to the flaring shape,the size should beproper,too big size will cause crack, too small size leads to insufficientcontact area,it should be uniform, smooth, no scratches, no burr.
Automatic Pipe End Flaring Machine is mainlyused for machining the copper or aluminum pipe end into flaring shape by highspeed spinning and pressing way,compared with the mechanical forging way,thetube end will be much more smooth, flat, no rupture.
主要技术参数
MainTechnical Parameters
| 铜管与铝管的加工直径 Copper & Al Pipe Diameter | 3-35MM |
| 铜管与铝管的加工长度 Copper & Al Pipe Length | ≥100MM |
| 固定与驱动方式Driving Mode | 气动+电动 Pneumatic or Electrical |
| 加工方式Processing Mode | 冷镦+旋压 Cold-forging+Spinning |
| 生产加工效率 Producing and Processing Efficiency | 1-5秒/件 1-5Seconds/PC |
| 输入电压Input Voltage | 220V / 380V / 440V / 480V, 50/60Hz |
| 设备重量Machine Weight | 350KG |
13601744484