SDMP3+FM高品质MP3耳机

品牌	Cannan
型号	SDMP3

屏幕尺寸	0（英寸）	屏幕色彩	无屏幕
接口	USB 2.0	支持音频格式	mp3
续航时间	8（小时）	重量	65（g）
FM功能	有FM功能	录音功能	无录音功能
直录功能	无直录功能	游戏功能	不支持游戏功能
电子书阅读	不支持电子书	特色	其他
适用送礼场合	员工福利、展销会、广告促销	加印LOGO	可以
加工定制	是	内存容量	1GB

      SD-MP3,插卡MP3,外代FM功能,立体声音质. 1.MP3,FM ,Headset and more                         2.Music playing time: up to 8 hours3.charging time: within 3 hours4.Standby time: up to 140 hours Black，Red,Blue,etc.. Volume+, Volume-,MFB, Play/Pause, Forward, Back    Card Hi-Fi Digital Music Headphone   Product pictures 1. Power indicator 2. Power ON/OFF 3. Charging indicator 4. USB port 5. Volume knob 6. PH Jack 7. MP3/FM Mode indicator 8. card/FM Mode button 9. Low power indicator 10. Pre button 11. Play/Pause search button 12. Next button 13. SD TF card   Technical specifications Audio mode: compatible with MP3. WMA. WAV format Frequency range of receiver: 87. 8-108MHz S/N ratio: >90dB THD<1% Frequency response: 20Hz-20 KHz Power supply: 300mA/h chargeable battery Continuous working time: more than 6 hours based on the volume at l/3 level Charging time: 2.5hours Working temperature: O’C - 50 C   Brief introduction   SD-MP3 is a digital Hi-FI stereo music headphone, compatible with MP3, WMA, and WAV. It is available for SD or TF card, also used as mobile hard disk and card reader. You can listen to school broadcast or other FM ones when you are tired of music. Indeed, it is perfect. In addition, it is convenient to carry because of its portable design. We can enjoy beautiful music anywhere. Meanwhile, the color of panel is changeable according to your fancy. It is quite fashion able and attractive.   Key points 1 .Battery:300mA/h, lasting working time 6-8 hours (FM or MP3). 2. FM/MP3 mode selectable (you can choose MP3 0r FM mode at the same time) 3. Play/Pause, Prev. /Rewind, Next/F. FWD can be controlled at MP3 mode. 4. Press and hold the MP3/FM button for 3seconds to enter the FM mode and search channel automatically 5. ON/ OFF switch on the left. 6. Compatible with MP3; WMA; WAV format. 7. Applicable both SD and TFT card. 8. Output voltage 550mV (32Ωresistance). 9.320hm Speaker Load (output power ratings is more than l0mW). 10. FM mode is supportable when taking out card or without it. MP3 mode appears when turning on headphone with card.     LED inclination 1. Charge indication: Red LED is on when charging and off when charging is finished. 2. FM/MP3 mode indication: Green and Red LED, green for FM condition, red for MP3. In order to reduce power consumption .improve working time and make customers clear about conditions at different operations. Flashing red light is on when playing music and static with button of play/pause. Flashing green one can be seen when listening to FM broadcast and static one appears at self-search or half self-search. 3. Low power indication: Low power indication starts at less than 3.3V. Red LED is used as a hint. Flashing LED appears at low power mode. On for l second and off for l second at the same time, the alarm sound from loudspeaker can be heard for twice. Interval time is 0.5 seconds then it turns off for four cycles Specific instructions Press Play/Pause for 3 seconds for auto-search. Then skip to broadcast lists and select with the button of Play/Pause. But the situation is applicable when the headphone is on.     Card Hi-Fi Digital Music Headphone   Product pictures 1. Power indicator 2. Power ON/OFF 3. Charging indicator 4. USB port 5. Volume knob 6. PH Jack 7. MP3/FM Mode indicator 8. card/FM Mode button 9. Low power indicator 10. Pre button 11. Play/Pause search button 12. Next button 13. SD TF card   Technical specifications Audio mode: compatible with MP3. WMA. WAV format Frequency range of receiver: 87. 8-108MHz S/N ratio: >90dB THD<1% Frequency response: 20Hz-20 KHz Power supply: 300mA/h chargeable battery Continuous working time: more than 6 hours based on the volume at l/3 level Charging time: 2.5hours Working temperature: O’C - 50 C   Brief introduction   SD-MP3 is a digital Hi-FI stereo music headphone, compatible with MP3, WMA, and WAV. It is available for SD or TF card, also used as mobile hard disk and card reader. You can listen to school broadcast or other FM ones when you are tired of music. Indeed, it is perfect. In addition, it is convenient to carry because of its portable design. We can enjoy beautiful music anywhere. Meanwhile, the color of panel is changeable according to your fancy. It is quite fashion able and attractive.   Key points 1 .Battery:300mA/h, lasting working time 6-8 hours (FM or MP3). 2. FM/MP3 mode selectable (you can choose MP3 0r FM mode at the same time) 3. Play/Pause, Prev. /Rewind, Next/F. FWD can be controlled at MP3 mode. 4. Press and hold the MP3/FM button for 3seconds to enter the FM mode and search channel automatically 5. ON/ OFF switch on the left. 6. Compatible with MP3; WMA; WAV format. 7. Applicable both SD and TFT card. 8. Output voltage 550mV (32Ωresistance). 9.320hm Speaker Load (output power ratings is more than l0mW). 10. FM mode is supportable when taking out card or without it. MP3 mode appears when turning on headphone with card.     LED inclination 1. Charge indication: Red LED is on when charging and off when charging is finished. 2. FM/MP3 mode indication: Green and Red LED, green for FM condition, red for MP3. In order to reduce power consumption .improve working time and make customers clear about conditions at different operations. Flashing red light is on when playing music and static with button of play/pause. Flashing green one can be seen when listening to FM broadcast and static one appears at self-search or half self-search. 3. Low power indication: Low power indication starts at less than 3.3V. Red LED is used as a hint. Flashing LED appears at low power mode. On for l second and off for l second at the same time, the alarm sound from loudspeaker can be heard for twice. Interval time is 0.5 seconds then it turns off for four cycles Specific instructions Press Play/Pause for 3 seconds for auto-search. Then skip to broadcast lists and select with the button of Play/Pause. But the situation is applicable when the headphone is on.